Matchbox 3”  Add-Adapter Set. MAS3 The Set contains 1 x Single Matchbox Add Adapter Block, A 75mm arm that slides onto the Standard Add-Adapter Block  and a3 inch threaded tube.Can be used to support any accessory like pole 'tulip' grips or keepnet etc that need to be kept close. [See Image] rrp £5.99

Matchbox 6” Add-Adapter Set. MAS6 The Set contains 1 x Single Matchbox Add Adapter Block, A 150mm/6in arm that slides onto the Standard Add-Adapter Block and a 6 inch threaded tube. Can be used to support any accessory like pole 'tulip' grips, pole socks or keepnet etc that need to be kept close.
[See Image] rrp £6.99

Matchbox 9” Add-Adapter Set. MAS9 The Set contains 1 x Single Matchbox Add Adapter Block, A 230mm/9in arm that slides onto the Standard Add-Adapter Block and a 9 inch threaded tube. Can be used to support any accessory like a bait waiter, pole 'tulip' grip, keepnet or any other attachment that requires a bit more space. [See Image] rrp £7.99

Matchbox Threaded Bankstick Sets. The Simple threaded bankstick tubes; where would be without these little wonders? The glue that binds the fishing accessories to your Chair or Seatbox System.

Each Set Contains: 2 x Treaded Tubes

• 2x3in MA3ST - £1.99
• 2x6in MA6ST - £2.49
• 2x9in MA9ST - £2.99
• Mixed Pack* MAST £3.49

* MAST mixed pack contains one of each tube size ie 3in, 6in and 9in Matchbox Threaded Tubes - 3 Tubes in Total

Matchbox Long Threaded Bankstick Tubes. These Long threaded bankstick tubes are to be used with an Add-Adapter set which then creates a solid arm to add additional threaded accessories to. [As shown below: Add-Adapter Rod Rest Arm Set]. A choice of two sizes 20” or 30”, sold as singular tubes.

MA20ST RRP: £2.99
MA30ST RRP: £3.99

Matchbox SX Standard Add Adapter Block. A handy block that will fit most seat box legs. The range of Add-Adapter bars then slide onto the block providing a versatile seatbox accessory system. Using the block allows you to position your adaptor at any angle as it is able to rotate 360 degrees around the leg, then positioned into place by tightening the block by the hand wheel to secure position.

Standard: 19mm Square Leg – 25mm Round Leg, available in Black or Blue
Metric: 20mm Square Leg – 28mm Round Leg.

The Matchbox SX Triple Keepnet Arm. A very useful addition for anglers who fish commercials where big weights are possible. This bar allows you to easily attach three keepnets so they're laid out neatly in front of you. Set includes a 30 inch arm that slides onto the Standard Add-Adapter Block and 3 x 3” Threaded Tubes.

The Matchbox SX Add Adapter Feeder Arm is available in 20in or 30in lengths and fits easily onto the leg of your box or footplate and provides a sturdy arm for your feeder rod rest. Set includes:

• 20in or 30in arm that slides onto the Add-Adapter Block
• Standard Add-Adapter Block
• 1 x 9” Threaded Tube
• Rod Rest Top

Matchbox SX Angled Extendable Pole Top Kit Arm. Again, set to be a top seller, the extendable Pole Top Kit Arm can be adjusted to the perfect angle via an Elbow joint towards the base of the unit. Takes up to 6 Top Sets and can be extended to take longer top sets as required. Mid bar roost is removable allowing the kit to be packed away with ease into a holdall.

The Matchbox SX Add Adapter Pole Support Arm fits easily onto the leg of your box or footplate and provides a sturdy arm for your pole rest. Available in 20in and 30in lengths. Set includes:

• 20in or 30in arm that slides onto the Add-Adapter Block
• Standard Add-Adapter Block
• 1 x 9” Threaded Tube
• Mini Pole Roller

The Matchbox Add Adapter Bars are available in a selection of handy lengths providing anglers with a host of options for securing accessories. Available in Black or Blue to match your adapter block (not supplied, available above MAAB-SX)

Matchbox SX Adapter Pole Sock Set.   The very popular alternative to the 'Tulip' Grip for securing the pole is the Pole-Sock. The Pole sock is much quicker and less wearing on the Pole than the Tulip.   Our purpose built Pole-Sock Adapter set will get you in Pole Position in no time. A part of the Add-Adapter Range. The Pole Sock Set Contains:

• Add Adapter Block
• Add Adapter Bar and 6inch Threaded Tube
• Pole Sock

Matchbox Off Leg Pole Roost Set. The Off Leg Pole Roost Set can be adjusted to make sure that your top sections stay at your preferred angle. Takes up to 6 Top Sets and can be moved to take longer top sets as required. This Off Leg Pole Roost Set is light weight and can easily be packed away with ease to, in the Matchbox accessory bag included with the set.

Set Includes:

• Add-Adapter Block [19mm Square Leg/25mm Round Leg)
  
• 9 inch/ 240mm Add-Adapter Bar
  
• 9 inch Threaded Tube
  
• Back Roost Accessory
  
• Pole Roost Blade
  
• Adjustable Tripod Stand
  
• Matchbox Accessory Bag [470mm L, 130mm H, 215mm W]
  

Matchbox SX Brolly Arm, available in Blue 19 inch Square Leg or Black 25mm Round Leg to match the SX Seatbox Range. Simple but essential for those wet days. The New SX Brolly Arms now bare the SX Range colours and are fully powder coated. [We still recommend that the Brolly is secured via guide ropes to ensure you or your tackle doesn't do any unwanted impressions of 'Mary Poppins' in High Wind conditions] Adapter includes a non-marking leg feature.

Matchbox SX Side Pole Support Arms. Set of 2 Support arms that ideally house the Matchbox Mini Pole Roller [as shown left] - Note: Pole Rollers and Threaded Tubes are Included in the set. Set also includes a non-marking leg feature.

Note: Image shown left does not reflect the Hole Choices available, new image to follow.

SPECIAL OFFER: Was:£14.99 Now:£9.99 Save:£5.00

Matchbox Rod Butt/Pole Rest, Designed to hold your rod/pole safely, includes a non-slip tilting head butt with a 3” support arm that is attached to the head/rod butt. Has the option to be used singularly as a rear rod butt, in conjunction with a rod rest arm set, as a pair to give your rod/pole support while feeding. The Matchbox Rod Butt/Pole Rest is designed to fit 16mm/25mm round leg and 19mm square leg seatboxes or to be added to an MC Add-Adapter Set to fit 22.5mm and 25mm round bar chairs.

Matchbox Mini Pole Roller. Strong and Reliable performance from the mini Pole Roller at a tiny price too.

Available in Black or Blue

Matchbox S Class Pole Sock. Has been designed to fit Matchbox threaded tubes and can be added to the add-adapter sets in this range. Note: Threaded tube not included.

Matchbox Pole Roost Top.   Designed to fit the Matchbox threaded tubes and can be added to the add-adapter sets in this range. Features a 6 divisional roost and can be angled with the assistance of a handy locking nut device.

Matchbox Round Feeder Rest Top.   Designed to fit the Matchbox threaded tubes and can be added to the add-adapter sets in this range. Can be angled with the assistance of a handy locking nut device.

Matchbox Rod Rest Top.   Designed to fit the Matchbox threaded tubes and can be added to the add-adapter sets in this range. The Matchbox Rod Rest Top can be angled as required.

Matchbox Feeder Rest Top.   Designed to fit the Matchbox threaded tubes and can be added to the add-adapter sets in this range. Can be angled with the assistance of a handy locking nut device.

Matchbox SX Multi Bar Support System fits onto the legs of your footplate [holes are precut to 25mm round or 19mm square and feature our special non marking leg system] The system provides an arm that all your other bars and accessories can be attached to. The SX Multi Bar Support System is now available in the two leg options and coloured to match the corresponding seatbox. [New images to follow soon].

System includes a non-marking leg feature.

Matchbox Class Free Standing Pole Roost. The Free Standing Pole Roost Set takes up to 6 Top Sets. The legs on both products can be easily adjusted, making sure that your top sets stay level even if the ground isn’t, when out of use the legs can be folded inwards and the roost blade is removable allowing this set to be packed away with ease in the Matchbox accessory bag included.

SPECIAL OFFER: Was:£29.99 Now:£19.99 Save:£10.00

Set Includes:

• Free Standing Back Roost
  
• Pole Roost Blade
  
• Adjustable Tripod Stand
• Matchbox Accessory Bag [470mm L, 130mm H, 215mm W]

Matchbox SX Back Rest. Currently only available in blue, the SX Back rest simply rolls up for easy storage and provides a much need rest for those who like that little extra bit of comfort. The SX Backrest will only fit our Square leg SX seatbox at this moment (it will not fit SX 25mm Round Leg Boxes)